Hai cercato: LABCONCO

Fornitore: LABCONCO

Descrizione: Fast-Freeze® flasks for FreeZone® freeze dry systems are designed to be easier to handle, faster to load, and more convenient to use in the laboratory for freeze drying.

Fornitore: LABCONCO

Descrizione: essiccatori, FreeZone®

Fornitore: LABCONCO

Descrizione: Glassware washing machines, Corner seal

Fornitore: LABCONCO

Descrizione: These portable systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and HEPA filter are mounted in the upper plenum to save space, and the enclosures have low installation costs and require no outside ducting. Systems also provide quiet operation as low as 45 dBA, depending on face velocity.

Fornitore: LABCONCO

Descrizione: SpillStopper™ work surface, left side cupsink cutout, 1524×762×32 mm, 68 kg

Fornitore: LABCONCO

Descrizione: Flexible duct connections reduce vibration between the blower and PVC ductwork.

Fornitore: LABCONCO

Descrizione: These PuriCare Open Access Transfer Station offer utmost efficiency for cage changing operations. Open access on two sides provides ample workspace for one or two operators to transfer animals from dirty cages to clean ones. This enclosure provides personnel, animal and environmental protection. HEPA-filtered vertical airflow provides Class 100 clean air in the work area to protect the animals from cross-contamination. At the same time, room air is drawn into grilles located on the work surface directly below the sash openings to ensure containment and protect the operator from allergens. All contaminated air inside the enclosure is filtered so that particulate-free air is exhausted back into the room, protecting the environment.

Fornitore: LABCONCO

Descrizione: Storage cabinets support fume hoods and used for storage and venting of small laboratory instruments, mild acids and other reagents.

Fornitore: LABCONCO

Descrizione: Storage cabinet accessory, Interior shelf kit with PVC tray for 1219 mm protector acid storage cabinets

Codice catalogo: (LBCP3505300)

Fornitore: LABCONCO

Codice articolo fornitore: 3505300

Codice articolo locale: LBCP3505300

Descrizione: Beakers specifically designed for the Goldfisch Fat Extractor. Thick-walled borosilicate glass with flanged and ground tops to facilitate connection to the condenser.

UOM: 1 * 6 pezzi

Promo

Fornitore: LABCONCO

Descrizione: These cabinets support fume hoods and safely store and vent solvents and other flammable liquids. The contents inside them are also protected during any fire case.

Fornitore: LABCONCO

Descrizione: Pump inlet filter

Codice catalogo: (LBCP110410021)

Fornitore: LABCONCO

Codice articolo fornitore: 110410021

Codice articolo locale: LBCP110410021

Descrizione: The Protector® XStream® benchtop laboratory hoods are chemical resistant, fiberglass reinforced, composite liner and baffle. These are designed for general chemical applications.

UOM: 1 * 1 pezzi

Promo

Fornitore: LABCONCO

Descrizione: All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Codice catalogo: (LBCP3924200)

Fornitore: LABCONCO

Codice articolo fornitore: 3924200

Codice articolo locale: LBCP3924200

Descrizione: Organic carbon filters for Protector® work stations with built-in blower, 5,4 kg, 457×914×250 mm, Esterno L×P×A: mm mm

UOM: 1 * 1 pezzi

Promo

Fornitore: LABCONCO

Descrizione: These glove boxes with stainless steel liner provide inlet and outlet ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment. Available with two or four glove ports (double version).