Hai cercato: Industrial Physics

Codice catalogo: (SIMELI9200)

Fornitore: Industrial Physics

Codice articolo fornitore: LI9200

Codice articolo locale: SIMELI9200

Descrizione: This meter is a non-destructive moisture meter for concrete. By measuring the electrical impedance, the moisture content of concrete can be determined. Readings are taken by pressing the instrument against the surface.

UOM: 1 * 1 pezzi

Promo

Fornitore: Industrial Physics

Descrizione: Stainless steel flow cup viscometers with fixed nozzle for measuring coatings and other fluids during application or production.

Fornitore: Industrial Physics

Descrizione: Titanium anodized aluminum or stainless steel cups designed with fixed stainless steel nozzle and handle, for measuring coatings and other fluids.

Codice catalogo: (SIMEDC7100)

Fornitore: Industrial Physics

Codice articolo fornitore: DC7100

Codice articolo locale: SIMEDC7100

Descrizione: DewCheck 4 - Dewpoint Meter (DPM)/ Dewmeter is an extremely versatile dewpoint meter to measure and record all climate parameters required to treat surfaces. It can be used to measure relative humidity (%RH), ambient temperature (Ta) and surface temperature (Ts) and calculates the dewpoint temperature (Td) and the difference between the dewpoint temperature and the surface temperature (ÄT).

UOM: 1 * 1 pezzi

Promo

Fornitore: Industrial Physics

Descrizione: Heat sink LDPE for insulation box CX2002, CX2017, CX2005

Fornitore: Industrial Physics

Descrizione: Termoigrometro digitale, ES electrode

Fornitore: Industrial Physics

Descrizione: Anodised aluminium and stainless steel viscometer cups with nozzle for break-thread flow time comparative measurements.

Codice catalogo: (SIMELD3057)

Fornitore: Industrial Physics

Codice articolo fornitore: LD3057

Codice articolo locale: SIMELD3057

Descrizione: SSPC-VIS 3 pictorial surface standard contains a series of 43 full-colour reference photographs to be used as a supplement to the SSPC standards for hand and power tool cleaned steel. Shows a total of seven different steel surfaces (four uncoated and three previously coated) before and after hand tool cleaning (SP 2), power tool cleaning with power wire brushes and sanding discs (SP 3), power tool cleaning to bare metal (SP 11), and commercial grade power tool cleaning (SP 15). It also contains pictures of SP 11 surfaces with a restored profile, a revised guide to the use of reference photographs, a new table of standards and conditions depicted and additional explanatory notes.

UOM: 1 * 1 pezzi

Promo

Codice catalogo: (SIMELD3061)

Fornitore: Industrial Physics

Codice articolo fornitore: LD3061

Codice articolo locale: SIMELD3061

Descrizione: Fitz's Atlas 2 is a reference manual of colour images with a concise description of every problem and their associate causes.

UOM: 1 * 1 pezzi

Promo

Codice catalogo: (SIMESP3200)

Fornitore: Industrial Physics

Codice articolo fornitore: SP3200

Codice articolo locale: SIMESP3200

Descrizione: Dust test kit allows assessment of the quantity and size of dust particles on surfaces prepared for painting.

UOM: 1 * 1 pezzi

Promo

Fornitore: Industrial Physics

Descrizione: Shore hardness test block kit, includes 3 test blocks (0, 75, and 85 shore hardness) with calibration certificate for Durometer D, Per: Durometers shore

Fornitore: Industrial Physics

Descrizione: Plastic (or aluminium) thickness combs to be used as a record of wet film thickness measurements, in 30 steps.

Fornitore: Industrial Physics

Descrizione: profi LIGNO are moisture meters specifically designed for wood and building materials such as screed or gypsum.

Fornitore: Industrial Physics

Descrizione: Cylindrical film applicator with four application sides for applying paint films of four different predefined thicknesses in film width 60 or 80 mm. Suitable for applying a host of different products onto flat and relatively solid substrates. Made from high grade stainless steel, the film applicator will not be affected by acid or base elements.

Fornitore: Industrial Physics

Descrizione: Spare cutting blade, 11 teeths, 1 mm, acc. to ISO 2409, suitable for CC2000 and CC3000 test kits

Fornitore: Industrial Physics

Descrizione: Dip cups can be used to provide a quick 'break-thread' flow time comparative measurements on site in a manufacturing environment.