Hai cercato: Industrial Physics

Fornitore: Industrial Physics

Descrizione: Accessory for coating tester, Sturdy stainless steel bradle for dry rot inspection in timber

Codice catalogo: (SIMESP1895)

Fornitore: Industrial Physics

Codice articolo fornitore: SP1895

Codice articolo locale: SIMESP1895

Descrizione: Impact tester used to determine the impact resistivity and flexibility of materials.

UOM: 1 * 1 pezzi

Promo

Codice catalogo: (SIMELI0055)

Fornitore: Industrial Physics

Codice articolo fornitore: LI0055

Codice articolo locale: SIMELI0055

Descrizione: This high precision destructive hygrometer is designed for applications in concrete, sand cement, and other construction materials. The water present in the sample chemically reacts with calcium carbide produces pressure in the vessel, which is proportional to the residual moisture content.

UOM: 1 * 1 pezzi

Promo

Fornitore: Industrial Physics

Descrizione: These coated metal calibration standards consist of a set of four calibration plates.

Codice catalogo: (SIMELD3056)

Fornitore: Industrial Physics

Codice articolo fornitore: LD3056

Codice articolo locale: SIMELD3056

Descrizione: SSPC-VIS 2 pictorial provides a method of evaluating degree of rusting on painted steel surfaces.

UOM: 1 * 1 pezzi

Promo

Fornitore: Industrial Physics

Descrizione: RAL 840-HR are the basic collection for matt colour shades and RAL 841-GL for glossy colour shades. Contains safety and signalling colours with the colour requirements of DIN regulations.

Fornitore: Industrial Physics

Descrizione: This apparatus is designed to detect of coating porosity in dielectric (insulation type) coatings on conductive substrates, including concrete.

Codice catalogo: (SIMELI0010)

Fornitore: Industrial Physics

Codice articolo fornitore: LI0010

Codice articolo locale: SIMELI0010

Descrizione: The MaxiLigno are equipped with the latest technology for precision and easy handling.

UOM: 1 * 1 pezzi

Promo

Codice catalogo: (SIMELD3059)

Fornitore: Industrial Physics

Codice articolo fornitore: LD3059

Codice articolo locale: SIMELD3059

Descrizione: This pictorial standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.

UOM: 1 * 1 pezzi

Promo

Fornitore: Industrial Physics

Descrizione: Shore hardness gauge test stand with weight, for Durometer shore A + D type, 160×114×290 mm, 5,72 kg, Per: Durometers shore

Fornitore: Industrial Physics

Descrizione: Plastic (or aluminium) thickness combs to be used as a record of wet film thickness measurements, in 30 steps.

Codice catalogo: (SIMELD0560)

Fornitore: Industrial Physics

Codice articolo fornitore: LD0560

Codice articolo locale: SIMELD0560

Descrizione: This densimeter is designed to perform automatic calculation of density and compensation of water temperature.

UOM: 1 * 1 pezzi

Promo

Fornitore: Industrial Physics

Descrizione: The Automatic Film Applicator Standard provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors.

Fornitore: Industrial Physics

Descrizione: Electronic coating gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals with all PosiTector 6000, 200, DPM, UTG, RTR and SPG probes.

Fornitore: Industrial Physics

Descrizione: Bird-type film applicators feature one flat edge and one application side for applying a pre-defined coating thickness. Bird-type applicator single gap is available in film width 50 and 75 mm and can be customised for applying a host of different products onto flat and relatively solid substrates. All Bird-type film applicators are made from high grade stainless steel and are not affected by acid or base elements.

Fornitore: Industrial Physics

Descrizione: The PosiTest DFT measure coatings on all metals - The DFT Fe measures non-magnetic coatings on steel while the DFT Combo measures both non magnetic coatings on steel and non conductive coatings on aluminum and brass.