Una gamma di bagni a circolazione refrigeranti/riscaldanti ecologici con un’interfaccia utente intuitiva e design affusolato. Le unità offrono un significativo risparmio sui costi di esercizio assicurando tuttavia un potente raffreddamento quando necessario. Scelta di 2 modelli con range di temperatura da −25 a 150 °C (a seconda del modello*). Ideali per applicazioni in ambito farmaceutico, didattico, industriale e di Life Science per l’uso con mini reattori di impianti pilota, per raffreddamento di evaporatori rotanti, come sostituti al raffreddamento con acqua corrente di rubinetto, per immersione di piccoli campioni, per fotometria, sistemi per cromatografia, preparazione di campioni, raffreddamento generale, chimica di reazione, controllo della temperatura, produzione di semiconduttori, reometria, rifrattometria e raffreddamento a elettroforesi.
- Full colour, 5 language QVGA TFT display on the ecocool 150R
- Active cooling through the whole temperature range up to +200 °C
- eco mode optimises the cooling control needed, enabling rapid cool down when required
- True energy saving of up to 80% in idle state compared with standard compressor chillers which only switch the compressor off
- Thermostat and chiller work in harmony, neither will operate alone, eliminating any danger of over-heating or freezing
- No-spill valved front drain and single front switch for user convenience
- No side vents, locate to suit the user, not the unit. Thermostat can be positioned at 90° for lengthways positioning
ecocool™ 100R is a general purpose circulating bath with 4 digit LED display for use from –20 to +100 °C, delivers 250 W of cooling power. 2 calibration points.
ecocool™ 150R is a general purpose circulating bath with digital display for use from –25 to +150 °C, delivers 350 W of cooling power. Unit is programmable (1×30) with adjustable pump, USB and temperature probe socket. 5 calibration points.
Max. flow rate / max. pressure: ecocool™ 100R: 17 L/min, 250 mbar pressure. ecocool™ 150R: 14 to 22 L/min, 530 mbar pressure.
Informazioni per l'ordine: All models are supplied assembled as ready to use kits, complete with 2×1,5 m, 9 mm internal Ø tubing, clips and connectors as standard. Temperature range of tubing supplied: −40 to +100 °C (can be cut to length as required). Optional IQ/OQ/PQ documentation, high temperature hosing, high pressure pumps, alternative connectors, temperature probes and Labwise™ control software (for LT ecocool™ 150R and 200) are also available.
Attenzione: Cooling capacity at +20, 0, −10 and −20 °C.
