Hai cercato: di-Sodio tetraborato

Codice catalogo: (DIAS920538)

Fornitore: DIAGNOSTIC SYSTEMS DIASYS

Codice articolo fornitore: 920538

Codice articolo locale: DIAS920538

Descrizione: [EN]GLUC/LACT.1000 2.0/1000 OPEN END CA 1 * 1 pezzi

UOM: 1 * 1 pezzi

Promo

Fornitore: LABCONCO

Descrizione: XPert™ balance enclosures provide user protection by keeping powders, particulates and fume contained during weighing procedures. They are well suited for pharmaceutical research and other laboratory applications involving weighing of toxic substances. These vented balance safety enclosures may be ducted to the outside or connected to the FilterMate Portable Exhauster to be exhausted back into the laboratory through HEPA filters, carbon filters, or a combination of both HEPA and carbon filters.

Fornitore: LABCONCO

Descrizione: XPert™ balance enclosures provide user protection by keeping powders, particulates and fume contained during weighing procedures. They are well suited for pharmaceutical research and other laboratory applications involving weighing of toxic substances. These vented balance safety enclosures may be ducted to the outside or connected to the FilterMate Portable Exhauster to be exhausted back into the laboratory through HEPA filters.

Codice catalogo: (135-0109)

Fornitore: CleanAir by Baker

Codice articolo fornitore: NP5260087

Codice articolo locale: CLEANP5260087

Descrizione: Prese triple (D/NL/TR)

UOM: 1 * 1 pezzi

Promo

Fornitore: CleanAir by Baker

Descrizione: Support frame for DLF 460, epoxy-coated, working height 900 mm

Fornitore: LABCONCO

Descrizione: Clean benches provide product protection from environmental contaminants for applications requiring a particulate-free work area, including plant tissue culture, electronic part inspection, syringe filling, medical device assembly, media plate preparation, and PCR.

Fornitore: LABCONCO

Descrizione: Purifier Vertical Clean Benches direct HEPA-filtered air downward over the work area to provide ISO Class 5 (formerly Class 100) conditions and protect your work from particulate contamination. Applications for clean benches include plant tissue culture, media plate preparation, electronics inspection, medical device assembly and pharmacy drug preparation.

Fornitore: LABCONCO

Descrizione: The Protector® XL benchtop laboratory hoods offer superior design flexibility. Their panel liners are supplied in three depths to meet individual installation and application requirements. These are suitable for general chemistry applications.

Codice catalogo: (LBCP3780401)

Fornitore: LABCONCO

Codice articolo fornitore: 3780401

Codice articolo locale: LBCP3780401

Descrizione: For use with Basic™ 47, Basic 70, Fiberglass 30, Protector® XStream®, Protector Premier™, Protector ClassMate®, Protector PVC perchloric acid, protector stainless steel perchloric acid, logic+, logic, cell logic, puriCare procedure stations and protector radioisotope laboratory hoods.

UOM: 1 * 1 pezzi

Promo

Codice catalogo: (135-1579)

Fornitore: ESCO BIOTECHNOLOGY EQUIPMENT

Codice articolo fornitore: 5130172

Codice articolo locale: ESCB5130172

Descrizione: SUPPORTO H REGOLABILE H71 CM CAPPE 1,8M 1 * 1 pezzi

UOM: 1 * 1 pezzi

Promo

Codice catalogo: (LAPH20031532)

Fornitore: LA PHA PACK

Codice articolo fornitore: 20031532

Codice articolo locale: LAPH20031532

Descrizione: [EN]20MM COMBINATION SEAL 1 * 1.000 pezzi

UOM: 1 * 1.000 pezzi

New Product Promo

Fornitore: LABCONCO

Descrizione: Ductless ventilation systems with glass tops and sides and low profiles are well suited for educational settings. Clean-Sweep air foil and zone-perforated rear baffle maximise containment.

Fornitore: LABCONCO

Descrizione: Protector premier hoods are suitable for general chemistry applications and also explosion-proof models are available for laboratories with potentially explosive/flammable atmospheres. Hoods are available with a built-in standard fiberglass blower, or an explosion-proof fiberglass blower, or without a blower (remote blower sold separately).

Fornitore: Thermo Scientific

Descrizione: Kit pannello di protezione per Heraguard™ ECO 1,8

Fornitore: KOETTERMANN

Descrizione: The pharmacy hood is a small hood, which was developed especially for the handling of hazardous substances in pharmacies. It complies with the requirements of section 4 (2) of the German Pharmacies Act and is ideally suited for handling dusty compounds or volatile chemicals. These hoods have been designed for safe handling of chemicals, mineral acids, concentrated and heated acids.

Codice catalogo: (LBCP4882806)

Fornitore: LABCONCO

Codice articolo fornitore: 4882806

Codice articolo locale: LBCP4882806

Descrizione: Solid epoxy work surface, flat, no cupsink cutout, for 30 inch width laboratory hoods, 760×760×30 mm, 39 kg, Per: Laboratory Hoods, Fiberglass 30

UOM: 1 * 1 pezzi

Promo